What To Do If Your Water Heater Suddenly Stops Working
What To Do If Your Water Heater Suddenly Stops Working
Blog Article
What're your thoughts about What Would Cause My Electric Water Heater to Stop Working??
Many contemporary houses take advantage of an electrical water heater for their heating unit, because of its comfort and also ease of use. However, much like any other electrical home appliances, troubles might emerge with its usage, unexpectedly. It can be really aggravating to get up to a chilly shower rather than a hot one or having your bath with water that isn't hot sufficient and even as well warm. Whatever the situation might be, hot water heater troubles can be fairly stressful. Luckily, we've made a list of possible solutions to your hot water heater concerns. There are a variety of aspects that might cause many of these problems, maybe a concern with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you switch off the major power supply for security. Whatever the issue is, getting it repaired should not pose too much of a concern if you follow these actions:
Call A Specialist:
If after replacing all defective components and resetting your temperature level, the water heater still isn't functioning, you might require to contact a professional plumber for a specialist opinion. The problem with your heating unit could be that the hot and cold taps have been changed or it may be undersized for the amount of warm water needed in your house. Whatever the instance may be, a specialist plumber would assist solve the problem.
Inspect Your Power Supply:
As basic as this may appear, it is really necessary. Without sufficient power, your hot water heater will not work. So the first thing to do when your water instantly retires is to confirm that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the concern, simply transform it off and on once more. Replace any type of broken or damaged fuse. Check the appliance with power after these changes to see if it's currently working.
Examine Your Thermostat:
If your water heater still isn't working or the water appearing isn't hot sufficient, you may require to check the temperature level setups on your upper thermostat. Guarantee the breaker is turned off before doing anything. Open the accessibility panel as well as press the red button for temperature level reset above the thermostat. This need to assist heat the water. Transform the circuit breaker back on and examine if the issue has been resolved.
Examine the Heating Element in the Hot Water Heater:
If it's not a power issue, then try checking out your burner if it is still functioning. Evaluate each of your heating elements to ensure the trouble isn't with any of them. If any of them is damaged, change that part and afterwards check whether the warm water is back on.
Final thought
Water heater troubles are not always major. Most of them are due to small problems like a blown fuse or worn-out burner. Replacing the damaged components should suffice. Nevertheless, if you are still unable to fix the problem, give a call to your local plumber to find to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As an avid person who reads on Hot Water Heater Repair, I think sharing that piece of content was beneficial. Sharing is good. Helping people is fun. I treasure reading our article about Hot Water Heater Repair.
Contact
Report this page